Perfect for retrieving a worker who has deployed their fall arrest lanyards, for someone incapacitated whilst aid climbing, or for numerous other scenarios. The Pick Off Rescue Kit allows the casualty to be lifted from their attachment point and lowered to safety. The addition of the optional Long Reach Pole means that the rescuer can effect the rescue remotely, without committing themselves over the edge.

The kit includes a 1.5m Anchor Strop, a compact self-contained haul system, a RAD, and our 11mm Low Stretch Rope to the length of your choice, all pre-rigged ready for use.

This kit is for rescue only. All individual components conform to their own relevant standard(s).

Specifications:

• Available lengths: 30m, 60m, 100m or any length on request
• Available with or without Long Reach Pole (pole has own carry bag)
• Length of pole – Minimum: 63cm
• Length of pole – Maximum: 310cm
• Weight of system with 30m of rope: 4.55kg
• Weight of Long Reach Pole & bag: 0.8kg

Product Codes:

The post Pick Off Rescue Kit appeared first on SAR Products.

This kit can come with 25m or 50m of rope. We advise that the user be trained in use of this equipment.

The Kit Contains:

• Small rescue rope bag
• Rope 25m to 50m
• A-B Descender
• 3x Steel Karabiner’s
• 1x 20cm Twin eye sling
• 1x 240cm 25mm round superweb sling
• 2x Heavy duty rope/sling protectors.
• Safety knife and pouch

You can also add the equipment below to the kit to transfer it into a pick off rescue kit:

• Extension pole
• Rocker
• 1x 120cm round sling
• 2x Karabiners
• 2x Std pulleys

Specifications:

• Kits can be adapted at the users request.
• Please see individual products for specifications.

The post High Access Rescue Kit appeared first on SAR Products.

Although these are the basic elements required for a riggers kit, we do understand these kits are very individual. Therefore, should you wish to purchase further items from our catalogue to compliment your kit or change any element, please advise and we will assist you in your selection.

Specifications:

• Kits can be adapted at the users request.
• Please see individual products for specifications.

The post Work At Height Riggers Kit appeared first on SAR Products.

There are no knots for the user to tie as this has been taken care of by either clipping the rope karabiner directly on to an anchor (EN795) or looping around a structure or girder then clipping back into the rope loop on the slider.

The access kit includes:

• Equipment holdall 35L
• Kestrel harness
• 4 – Klet Lite karabiners
• 2 – Oval screw gate steel karabiners
• 2 – Rockers
• 11m low stretch rope to required length
• 4 – PVC rope protectors
• 2 – 10cm twin eye sling

This system must be used from the front chest attachment only.
Training is highly recommended for this system so that the user understands its many uses.

Specifications:

• Each kit contains all the items shown in the picture with a either 25 or 50 meters of rope.
• As a work restraint/positioning system it will conform to EN358 and as a vertical back-up system EN353-2. Each individual item in the kit conforms to the correct EN standards and are compatible for this use. If a harness is not required because the client already has one this can be taken out as the kit can be used with any of the SAR full body harnesses or sit harness with the chest harness linked.

The post Rooftop Access Kit appeared first on SAR Products.

Although these are the basic elements required for the work at height kit, we do understand these kits are very individual. Therefore, should you wish to purchase further items from our range to compliment your kit or change any element, please advise and we will assist you in your selection.

Specifications:

• Kits can be adapted at the users request.
• Please see individual products for specifications.

The post Work At Height Kit appeared first on SAR Products.