The pro ALLP tech is the result of years of technical development and research and puts more control and safety into the hands of the technical rope user, especially in Rescue as this was why it was designed
The pro ALLP tech was confirmed in the UK HSE industrial rope access investigation into items of personal protective equipment by Lyon, as excellent, and having consistent results.
The pro ALLP tech was the first descender to be tested to prEN 12841-C Rope Adjustment Devices. Most personnel are led to think that EN341 is the standard for descenders but this is wrong. EN341 is for Descenders for Rescue and this is a system not a piece of equipment and to fully conform with it this must be sold with the correct rope as a Package
The pro ALLP tech was tested under lab. conditions and proven to be compatible with low stretch ropes of 10.5 to 12.7mm from one manufacturer and in compliance with EN1891. Naturally ropes vary according to manufacturer and the type of mantle. Also physical conditioning changes the reaction of a descenders, such as wet, dry, ice, dirt, humidity etc.. all must be appreciated when in use.
The pro ALLP tech was also dynamically tested with a 200kg weight F.F.1 1M for Rescue Technicians, as this could happen in a pick-off rescue. Except the rope would already be loaded with 100kg so the impact, slip (if any) and extension would be negligible.
SAR products Ltd., strongly recommends that users be trained in the many applications of the pro ALLP tech and learn about its practical and physical strengths and limitations
It can be used in the following ways:
Screw controlled descent.
Autolock controlled descent.
Variable max. speed setting
for Autolock function.
Ascender.
Belay break.
Tensioned line break.
Hauling system break.

Specifications & Requirements:

Colour: Purple or Black
Control: Screw and Leaver
Weight: 575 gram’s
Min Static slippage @ 3.5 kN
Min Static load for mins against a barrel knot 15kN
Max Impact 100kg mass @ F.F.2 with 1M strop 6kN